75
Chapter 6 Using the Library Administration Menu
2
Set the following items.
Library
Enter whether or not to enable SCSI ID and SCSI parity of the AIT library.
Drive
Enter whether or not to enable SCSI ID and SCSI parity of Drive.
3
Click “Submit”.
4
When “Reboot now?” appears, click “OK”.
The settings become effective when the library restarts.
After the library has restarted, if the screen displayed by your browser is
not correct, click “Refresh”.
Password
In “Password”, the password can be set or changed. The password is extremely
important for the security of the library. When accessing the Library
Administration Menu, be sure to change the password before configuring the
settings. Furthermore, closely guard the password.
Notes
• Because the password and control panel password are the same, the password
can also be set using the Password Menu of the control panel.
• The network password and user name are separate, therefore cannot be
changed.
1
Click “System Configuration” on the Library Administration Menu, then
click “Password”. You can also directly click “Password” which is located
below “System Configuration”.
The “Password” page appears.
