Sony Network Walkman NW-HD3, Operating Instructions Manual

Page: 95 / 458

4
Press

to select “Yes,” and then
press

.
The message appears, and then the Format
display appears.
To cancel set up
In step 4 , select “No,” and then press

.
The Format display appears.
Press MENU to return to the MENU display.
Press and hold MODE or press MENU in the
MENU display to return to the display before
step
1 .
To return to the display where you select
a MODE
Press MODE.
Note
You cannot reset to the factory settings during
playback.
Initializing Hard Disk
You can initialize the built-in hard disk of the
player. If the hard disk is initialized, all the
audio data and the other data stored will be
erased. Be sure to verify the data stored in the
hard disk prior to initializing.
If tracks are erased by initializing, SonicStage
recognizes them as tracks to be transferred
back to the computer when the player is
connected to your computer. Therefore,
the remaining transferable count increases
automatically.
1
While the player is stopped, press
MENU.
The MENU display appears.
2
Press

or

to select “Format,” and
then press

.
The Format display appears.
Continued 
37
GB
Other Functions