Sony MSW-900 Operation Manual Download Page 57 | Manualshive

Page: 57 / 388

Sony MSW-900 Operation Manual Download Page 57

2

Chapter 2 Locations and Functions of Parts and Controls

2-41

6

LIGHT switch

This switch controls the display panel light.

ON:

Turns the panel light on.

OFF:

Turns the panel light off.

7

WARNING indicator

This indicator lights up or flashes when there is a fault in the VTR.

See “6-3 Operation Warnings” on page 6-14 for more information about the
relationships between the operation of the indicator and the meanings of the
indications.

8

Display panel

VTR error messages, battery status, tape status, audio level, time data,
and so forth are displayed on this panel.

For more information, see “2-8 Warnings and Indications on the Display Panel”
on page 2-42.

9

REAR TALLY indicator

This indicator is identical to the BACK TALLY indicator

4

when the

BACK TALLY switch is set to ON.

«
...
55
56
57
58
59
...
»

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments