Sony MSW-900 Operation Manual Download Page 199

Page: 199 / 388

Chapter 4 Adjustments and Settings for Recording

4-73

Message
display condition

When the shutter speed
and mode setting has been
changed

When the black or white
balance has been adjusted

a) This is also displayed for about 3 seconds when the SHUTTER selector is set to

ON.

Changing the display mode

The currently set display mode appears on the VF DISP 1 page of the
USER menu. Follow the procedure below to change it.

Follow steps 1 to 2 in “4-7-2 Selecting the Display Items” on page
4-69, until the VF DISP 1 page of the USER menu is on the
viewfinder screen.

Turn the MENU knob to move the

mark to VF DISPLAY

MODE, and push the MENU knob.

The

mark to the left of VF DISPLAY MODE changes to the

mark and the

mark to the left of the setting changes to the ? mark.

Message

: SS : 1/100 (MSW-900) or 1/60
(MSW-900P) (or 1/125, 1/250,
1/500, 1/1000, 1/2000,
ECS, EVS)

E.g. WHITE : OK

For more information, see
Section “4-1 Adjusting the Black
Balance and the White Balance”
(page 4-1).

Display mode
setting
1

N Y

(Continued)

Summary of Contents for MSW-900





































































































































































































































































































































































































Search results

Summary of Contents for MSW-900

Reviews:

Sony MSW-900, Operation Manual, Page: 199 / 388

Search results

Summary of Contents for MSW-900

Reviews: