manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 126 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 126

3

Chapter 3  Recording and Playback

3-63

Removing the setup signal from the external video
signals (MSW-900 only)

When the UC/J SELECT item is set to UC on the FORMAT page of the
OPERATION menu, the SETUP REMOVE item appears on the EXT
VIDEO IN page of the USER menu.

The SETUP REMOVE item allows you to eliminate the setup signal
from the external video signals within a range of from 0 to 10 % in 0.5 %
steps. The elimination range has been set to 7.5 % at the factory.

Note

When the UC/J SELECT item is set to UC on the FORMAT page of the
OPERATION menu, a 7.5 % setup signal is automatically added to the
composite video signal output from the TEST OUT connector.

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments