manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 115 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 115

3

Chapter 3  Recording and Playback

3-52

  ? 1 0   T E L E   F I L E             T O P

  T E L E   F I L E   C L E A R   :     E X E C

I D :
S I Z E       :         1 K B Y T E
R E M A I N   :     1 0 0 %
S T A T U S   :   S T A N D B Y

4

When the CONTENTS page is displayed, turn the MENU knob to
move 

t

 mark to TELE FILE, then push the MENU knob.

When any page of the FILE menu is displayed, turn the MENU
knob until the TELE FILE page appears, then push the MENU
knob.

The TELE FILE page appears.

The remaining capacity of the memory label is displayed at the
REMAIN column.
You can record the recording start time code about 130 times on the
memory label of 1 Kilobyte.

Note

When the remaining capacity of the memory label becomes 0 %,
you can not record the recording start time code any more.
“0 %” is displayed at the REMAIN column and the message
“MEMORY FULL” is displayed at the STATUS column.

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments