manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 226 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 226

4

Chapter 4  Adjustments and Settings for Recording

4-100

4-8-2 Selecting the Output Signals

The OUTPUT SEL page of the USER menu allows you to set whether or
not the video signal is output from the VIDEO OUT connector. You can
also select the type of video signals from the VIDEO OUT connector
(when the MSDW-902 (not supplied) is installed).

Follow the procedure below to select the output signal.

1

Set the MENU ON/OFF switch to ON.

The page that was on the screen when the last menu operation ended
appears on the viewfinder screen.

2

Turn the MENU knob until the OUTPUT SEL page appears, and
push the MENU knob.

The OUTPUT SEL page appears.
The current setting of an item appears to the right of the item.

,                                                                                                       

    0 1   O U T P U T   S E L

  R E A R   B N C   O U T   S E L :       O F F

(Continued)

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments