manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 21 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 21

2

Chapter 2  Locations and Functions of Parts and Controls

2-5

3

2

1

2-3 Audio Functions

Audio functions (1)

1

 Microphone

This is a super-cardioid directional microphone with an external power
supply (+48 V) system.

2

 MIC IN (microphone input) connector (XLR type, 5-pin, female)

The supplied microphone connects to this connector. By using an
extension cable (not supplied), you can connect a microphone other than
the supplied one as long as it is provided  with an external power supply
system. The connector supplies power (+48 V) to the microphone.

3

 MIC LEVEL knob

This knob adjusts the audio level of the microphone connected to the
MIC IN connector.

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments