Sony MSW-900 Operation Manual Download Page 194

Page: 194 / 388

Chapter 4 Adjustments and Settings for Recording

4-68

ID number indicator

This indicates the ID number selected from ID 1 to ID 4. This indicator
is recorded together with the color bars.

Date and time indicator

This shows the date and time of recording. This indicator is recorded
together with the color bars.

Model name and serial number indicator

This displays the model name and serial number of the camcorder. This
indicator is recorded together with the color bars.

16:9 mode indicator

This indicates the 16:9 mode.

Cassette number indicator

This displays the cassette number. This indicator is recorded together
with the color bars.

Shot number indicator

This displays the shot number. This indicator is recorded together with
the color bars.

Summary of Contents for MSW-900





































































































































































































































































































































































































Search results

Summary of Contents for MSW-900

Reviews:

Sony MSW-900, Operation Manual, Page: 194 / 388

Search results

Summary of Contents for MSW-900

Reviews: