2
Chapter 2 Locations and Functions of Parts and Controls
2-7
4
LEVEL (CH-1/CH-2) (audio channel 1 and channel 2 recording
level) controls
These controls adjust the audio levels of channels 1 and 2 when the
AUDIO SELECT switches are set to MANUAL.
5
AUDIO SELECT (CH-1/CH-2) (audio channel-1 and channel-2
adjustment method select) switches
These switches select the audio level adjustment method for each of
audio channels 1 and 2.
AUTO:
Select this setting for automatic adjustment.
MANUAL:
Select this setting for manual adjustment.
6
AUDIO IN CH-1/CH-2 / CH-3/CH-4 (audio input select)
switches
AUDIO IN CH-1/CH-2 switches
These switches select the audio input signals to be recorded for audio
channels 1 and 2.
FRONT:
The input signal source is the microphone connected to the
MIC IN connector.
REAR:
The input signal source is the audio equipment connected to the
AUDIO IN CH-1/CH-2 connectors.
WIRELESS:
The input signal source is a WRR-855A/855B UHF
Synthesized Tuner Unit (not supplied).
Note
Since the REAR XLR AUTO item is set to ON on the VTR MODE 1
page of the MAINTENANCE menu as the factory setting, the signal
input to the AUDIO IN CH-1 or CH-2 connector is automatically
selected as the signal to be recorded when the audio cable is connected to
either the AUDIO IN CH-1 or CH-2 connector, regardless of the AUDIO
IN CH-1/CH-2 switch settings (XLR connection automatic detection
function). To disable this function, set REAR XLR AUTO to OFF.
For detailed information on menu operation, see “4-6-2 Basic Use of the Menu”
on page 4-49.