Sony MSW-900 Operation Manual Download Page 218

Page: 218 / 388

Chapter 4 Adjustments and Settings for Recording

4-92

To disable display of the status confirmation windows

Set the MENU ON/OFF switch to ON.

The page that was on the screen when the last menu operation ended
appears on the viewfinder screen.

Turn the MENU knob until the SET STATUS page appears, and
push the MENU knob.

The SET STATUS page appears.
The current setting of an item appears to the right of the item.

Item

Content

ABNORMAL

Selects whether or not the ABNORMAL window is
displayed (ON or OFF).

FUNCTION

Selects whether or not the FUNCTION window is
displayed (ON or OFF).

STATUS AUDIO Selects whether or not the STATUS AUDIO window

is displayed (ON or OFF).

1 2 S E T S T A T U S

  S T A T U S   A B N O R M A L   :         O N
  S T A T U S   F U N T I O N     :         O N
  S T A T U S   A U D I O         :         O N

(Continued)

Summary of Contents for MSW-900





































































































































































































































































































































































































Search results

Summary of Contents for MSW-900

Reviews:

Sony MSW-900, Operation Manual, Page: 218 / 388

Search results

Summary of Contents for MSW-900

Reviews: