manualshive.com logo in svg

Sony MSW-900, Operation Manual, Page: 18 / 388

Share
Download
Sony MSW-900 Operation Manual Download Page 18

2

Chapter 2  Locations and Functions of Parts and Controls

2-2

3

POWER switch

This switch turns the main power supply on and off.

4

LIGHT switch

This switch selects the way in which a video light connected to the
LIGHT connector is switched on and off.

AUTO:

 The video light is automatically turned on, when starting

recording with the VTR starts, since a DC 12V signal is output from
the LIGHT connector during recording. When recording in Interval
Rec mode with the MSDW-903 (not supplied), the light is
automatically turned on before the start of recording since a DC 12V
signal can be automatically output before a frame picture is shot.

MANUAL:

 A DC 12V signal is always output from the LIGHT

connector. Whether the light is on or off is based on the position of
the ON/OFF switch of the light itself.

Summary of Contents for MSW-900





































































































































































































































































































































































































Reviews:

No comments