Chapter 6 Maintenance
6
6-9
internal batteries type, set the appropriate LINE/MIC/+48V ON
switch to MIC.
If the microphone you connect to AUDIO IN CH-1 or CH-2 is of the
external power supply type, set the appropriate LINE/MIC/+48V
ON switch to +48V ON.
3
Set the AUDIO IN switches to REAR.
4
Aim the microphones at a sound source.
5
Check that the audio level meter in the display panel and the audio
level indicators in the viewfinder reflect the changing sound level.
(6) Checking the XLR connection automatic detection
function
Before starting to check, remove the microphone connected to the MIC
IN connector if it is connected.
1
Perform operations of steps 1 and 2 explained in “(5) Testing
external microphones”.
2
Set the AUDIO IN switches to FRONT.
3
Perform operations of steps 4 and 5 explained in “(5) Testing
external microphones”.
When performing the operation of step 5 in “(5) Testing external
microphones”, if the audio level meters in the display panel and
audio level indicators in the viewfinder reflect the changing sound
level, the function of the XLR connection automatic detection works
correctly.
(Continued)