Sony IPELA SNC-CH110 User Manual Download Page 80

Page: 80 / 97

Ot
her

Using the SNC toolbox

Privacy Masking:

Displays the Privacy Masking

screen.

Not available with this product.

Panorama Creator:

Displays the Panorama Creator

screen.

Not available with this product.

Custom Homepage:

Displays the Custom Homepage

screen.

Firmware Upgrade:

Displays the Firmware Upgrade

screen.

Initialize Device:

Reboot:

Restarts the device.

Factory Default:

Initializes the device to factory

default.

Backup setting data:

Backs up setting data on a

computer.

Device Homepage:

Connects to the device.

Device Log:

System Log:

Obtains system log for the device.

Access Log:

Obtains access log for the device.

Tool Log:

Obtains SNC toolbox log.

Option:

Displays the screen for modifying SNC toolbox

settings.

Task (K) menu

Task List:

Displays the Task list screen.

Add Task:

Displays the Task Wizard screen.

Modify Task:

Displays the Task editing screen.

Delete Task:

Deletes task.

Help (H) menu

Version:

Displays SNC toolbox version information.

Function buttons

Function buttons are used for updating lists and
displaying dialog.

Search

Updates the Device list in the search result.

Account

Sets the administrator for each device.

Network

Displays the

Network Setting

dialog.

Masking

Displays the

Privacy Masking

dialog.

Not available with this product.

Panorama

Displays the

Panorama Creator

dialog.

Not available with this product.

Custom HP

Displays the

Custom Homepage

dialog.

Setting

Displays the settings screen for the device.

Task

Displays the

Task List

dialog.

Device tree view

This function allows you to customize folders. The
registration details of My device can be displayed in tree
format.

Search result folder

When this folder is selected, devices in the same
segment detected at time of startup or by

Search

are

displayed in the Device list.

Error folder

When this folder is selected, devices registered in My
device folder that can not be connected are displayed in
the Device list.
Also, if a registered device is not found on the network,
it will also be registered in this folder.

My device folder

When this folder is selected, devices in the Search result
folder or registered manually are displayed in the Device
list.

Device list

Devices registered in the folder selected at Device tree
view are displayed in a list.

Device name

Displays individual device names.

Status (Only for Error folder and My device
folder)

You can check the current connection status.

MAC address

You can check the MAC address of the device.

Device address

You can check the IP address of the device.

Port No.

You can check the port number of the device.

DHCP/Fixed IP

Displays whether the IP address of the selected device is
DHCP or fixed IP.

Model

Displays the model name.

Summary of Contents for IPELA SNC-CH110


































































































Search results

Summary of Contents for IPELA SNC-CH110

Reviews:

Related manuals for IPELA SNC-CH110

Brands by name

Popular brands

Sony IPELA SNC-CH110, User Manual

Search results

Summary of Contents for IPELA SNC-CH110

Reviews:

Related manuals for IPELA SNC-CH110

Brands by name

Popular brands