Pre
par
at
ion
Assigning the IP Address to the Camera
11
Note
If you select
Save
in the “File Download – Security
Warning” dialog, you will not be able to perform
installation correctly. Delete the downloaded file, and
click the Setup icon again.
If the message “Internet Explorer – Security Warning”
appears, click
Run
.
If the message “User Account Control – An unidentified
program wants access to your computer” appears, click
Allow
.
The software installation starts.
Starting the software
When you start software such as SNC toolbox, the
message “User Account Control – An unidentified
program wants access to your computer” may appear. In
this case, click
Allow
.
Installing ActiveX Control
During installation of ActiveX Control, the information
bar or “Security Warning” may appear. In this case,
operate as follows:
If the message “Information Bar” appears, click
Close
.
If the information bar appears, click on the bar and select
Install
ActiveX Control…
.
If the message “User Account Control – Windows needs
your permission to continue” appears, click
Continue
.
If the “Internet Explorer – Security Warning” message
appears, click
Install
.
Installation of ActiveX Control starts. When installation
is completed, the main viewer or Motion detection menu
appears.
Configuring Windows Firewall
SNC toolbox may not operate correctly depending on
the configuration of Windows Firewall. (No cameras are
shown in the list even if they are detected.) In this case,
confirm the Windows Firewall configuration as follows:
Example: In the case of SNC toolbox
To turn Windows Firewall off
1
Select
Control Panel
from the
Start
menu of
Windows.
2
Click
Windows Firewall
.
3
Select
Turn Windows Firewall on or off
.
“User Account Control – Windows needs your
permission to continue” may appear. In this case,
click
Continue
.
Program name
Program name
