Sony HVR-M10C, Service Manual

Page: 279 / 329

Chapter 3 Dubbing/Editing
Chapter 3 Dubbing/Editing
41
To cancel the time code setting
Select [CANCEL] in step 7 , then press the EXEC
button.
To reset the time code
Select [RESET] in step 4 , then press the EXEC button.
To set the value of the user bits
You can set the user bits as eight-digit hexadecimal
values (base 16) to have the date, time, scene number,
and other information inserted into the time code track.
1
Press the MENU button to display the menu.
2
Press the f / F buttons to select [TC/UB SET], then
press the EXEC button.
3
Press the f / F buttons to select [UB PRESET],
then press the EXEC button.
4
Press the f / F buttons to select [PRESET], then
press the EXEC button.
5
Set the first two digits. Press the f / F buttons to
select the number, then press the EXEC button.
6
Repeat step
5
to set the other digits.
7
Press the f / F buttons to select [OK], then press
the EXEC button.
The user bits are set.
8
Press the f / F buttons to select [OK], then press
the EXEC button.
The menu display returns to that of step
2
.
To cancel the user bits setting
Select [CANCEL] in step 7 , then press the EXEC
button.
To reset the user bits
Select [RESET] in step
4
, then press the EXEC button.
To set the user bit to the real time clock
Select the [TC/UB SET] menu, [UB TIME REC], then
[ON].
Note
The user bit time display is recorded at three-frame
intervals for a tape recorded in the HDV1080i format.
To set the time code when the recording
starts
Set [TC MAKE] on the [TC/UB SET] menu to select
the time code to be recorded when recording starts.
REGENERATE: The time code value is set to
continue the time code from the time code already
recorded on the tape. If you start recording from a
blank portion of the tape, the time code starts from
00:00:00:00.
PRESET: The time code starts from the value set in
[TC PRESET] on the [TC/UB SET] menu.
AUDIO SET
AUDIO MONI
AUDIO MIX
AUDIO MODE
AUDIO LOCK
AUDIO LIMIT
[ MENU ] : END
TC / UB SET
[ MENU ] : END
RETURN
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TIME REC
00:00:00:00
UB PRESET
00 00 00 00
[ MENU ] : CANCEL
RETURN
PRESET
RESET
UB PRESET
00 00 00 00
[
MENU
]
: CANCEL
RETURN
PRESET
RESET