manualshive.com logo in svg

Sony HVO-4000MT, Instructions For Use Manual

Share
Download
Sony HVO-4000MT Instructions For Use Manual Download Page 53

53

Playback

You can play back the most recent recorded data stored on 
the unit’s internal hard disk via simple controls.

• Videos and still images recorded in [Ch1 2K Rec] mode 

can only be played back in [Ch1 2K Rec] mode. 
Similarly, videos and still images recorded in modes 
other than [Ch1 2K Rec] mode can be played back in 
modes other than [Ch1 2K Rec] mode.

• Signals will only be output to SDI output connector C 

during [Ch1 2K Rec] mode. The playback resolution 
will be 1920 × 1080 for both videos and still images.

You can also play back recorded data from search 
results. For details, see “Image Search” (page 54).

Playing Back the Most Recent Data 
(Quick Playback)

Press the 

B

 PLAY button to play back the most recently 

recorded data on the internal hard disk.

Ch1 recorded video data is played back with quick 
playback. Recorded data that does not include Ch1 video 
will not be played back.

Playback operations

You can use the buttons on the front panel of the unit to 
perform the following playback operations.

Fast forward playback

Press the 

M

 FF button.

Depending on the structure of the data, fast forward 
playback may not be possible for the entire recording.

Rewind playback

Press the 

m

 REW button.

Pause playback

Press the 

X

 PAUSE button.

To resume playback, press the 

X

 PAUSE button again or 

press the 

B

 PLAY button.

Stop playback

Press the 

x

 STOP button.

• If you press the MENU button during playback, 

playback will stop.

• When NTSC is selected as the video format under the 

system administrator settings, PAL-format recorded 
data cannot be played back properly. Conversely, when 
PAL is selected, NTSC-format recorded data cannot be 
played back properly.

Notes

Tip

Tip

Tips

Summary of Contents for HVO-4000MT






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands