76
Editing Cases
Edit cases and categories for surgical procedures and
examinations, and create the list of cases that will be used
in the various screens.
1
Select [Edit Case List] in the [System Admin
Settings] screen, and press the ENTER button.
The [Edit Case List] screen appears.
2
Edit the case information.
Sorting the Case List (page 76)
Registering Categories (page 76)
Selecting Categories (page 77)
3
Select [Apply] in the [Edit Case List] screen, and
press the ENTER button.
The configurations are saved, and the [System Admin
Settings] screen appears again.
Registering Cases
Up to 100 case entries can be registered for a single
category.
1
Select [Add] in the [Case] area of the [Edit Case List]
screen, and press the ENTER button.
The [Add] screen appears.
2
Enter up to 20 characters for the case name, select
[Add], and then press the ENTER button.
The case is added to the list in the [Edit Case List]
screen.
Deleting Cases
1
Select the case you want to delete in the [Edit Case
List] screen, select [Delete] in the [Case] area, and
then press the ENTER button.
2
Select [OK] when the confirmation message appears,
and press the ENTER button.
Sorting the Case List
1
Select the case you want to reposition in the [Edit
Case List] screen, select [Up] or [Down] in the [Case]
area, and then press the ENTER button.
The case entry moves up or down one position at a
time.
Editing Case Names
1
Select the case you want to rename in the [Edit Case
List] screen, select [Edit] in the [Case] area, and then
press the ENTER button.
The [Edit] screen appears.
2
Rename the case, select [Apply], and then press the
ENTER button.
The configurations are saved, and the [Edit Case List]
screen appears again.
Registering Categories
1
Select [Edit] in the [Category] area of the [Edit Case
List] screen, and press the ENTER button.
The [Edit Category List] screen appears.
2
Select [Add], and press the ENTER button.
The [Add] screen appears.
3
Enter up to 20 characters for the category name,
select [Add], and then press the ENTER button.
A sequential number is assigned to [No.]
automatically and cannot be changed.
4
When you finish configuration, select [Apply] and
press the ENTER button.
The configurations are saved, and the [Edit Category
List] screen appears again.
Summary of Contents for HVO-4000MT
Page 117: ......
