72
Chapter 4
Time Data and Sub LCD Menu
Chapter 4
Time Data and Sub LCD Menu
8
KEY INH (key inhibit) setting
Set to ON to disable the buttons on the control panel.
(Sub LCD menu operations can still be performed
even when this item is set to ON.)
You can select the buttons that are disabled under
setup menu item 118.
General Settings Pages of the Sub LCD Menu
If you try to operate the disabled buttons, the message
“!!KEY INH.!” appears in the time data display area on
the sub LCD.
To switch to general settings page (2)
Press the PAGE button.
General settings page (2)
LIGHTSW
SUB
BAT–END
11.0
BAT–TYP
AUTO
BAT–NE
11.3
BACKLGT
NORMAL
3
BAT-END setting
4
BAT-NE setting
5
LIGHTSW setting
2
BAT-TYP setting
1
BACKLGT setting
1
BACKLGT (back light) setting
Set to HIGH to increase the brightness of the LCD
monitor back light.
2
BAT-TYP (battery type) setting
Set the type of the battery used.
AUTO:
The battery type is automatically checked.
Ni:
BP-90/90A
Li:
BP-L60/L60A/L90/L90A
ANTON:
Anton Bauer Magnum battery
Note
To use the Anton Bauer Magnum battery, you require
a special battery mount to be attached to this unit.
For more information about the special battery mount,
contact an Anton Bauer agent or your Sony dealer.
3
BAT-END (battery end) setting
Set a voltage value to indicate the shutdown voltage of
this unit.
4
BAT-NE (battery near end) setting
For alarms that alert you when the end of power as
specified in the battery end setting
3
is near, specify a
voltage that at which to begin the alarm display.
5
LIGHTSW (backlight control switch) setting
Control the light power of the LCD monitor and sub
LCD.
SUBMAIN:
The both are controlled by the LIGHT
switch.
MAIN:
The LCD monitor backlight power is
controlled by the LIGHT switch. The sub LCD
backlight power is continually on.
SUB:
The sub LCD backlight power is controlled by
the LIGHT switch. The LCD monitor backlight
power is continually on.
