Chapter 7
Setup Menu
112
Chapter 7
Setup Menu
Extended Menu
Menu items in the 300s, relating to editing operations (continued)
Menu items in the 400s, relating to preroll
Menu items in the 500s, relating to tape protection
Item number
Item name
Settings
Item number
Item name
Settings
401
FUNCTION MODE
AFTER CUE-UP
Select the state that the unit goes into after a cuing-up operation.
STOP:
Stops (the STOP mode).
STILL:
Still playback (in search mode).
403
AUTOMATIC
PREROLL
REFERENCE
ENTRY
Select whether or not the edit IN point is automatically set by pressing the PREROLL
button when the IN point is not set before starting preroll.
DIS:
IN point is not set automatically.
ENA:
IN point is set automatically.
Item number
Item name
Settings
501
STILL TIMER
Select the time delay from the tape transport stopping (either the “STOP” mode or the
still playback mode in search mode) until the unit automatically switches to the tape
protection mode, in order to protect the rotary heads and the tape.
0.5S... 1M ...5M:
Set the value in the range 0.5 seconds to 5 minutes.
502
TAPE
PROTECTION
MODE FROM
SEARCH
Select the type of tape protection to use when switching from still playback in search
(jog/shuttle) mode to tape protection mode.
STEP:
Step forward at 0.03 times normal speed for 2 seconds.
STDBY:
Switch to Standby OFF mode (the unit not on standby).
327
AUDIO MODE
CHANGE
Select whether to allow audio data recorded on tape in two-channel mode (or four-
channel) to be re-recorded in four-channel (or two-channel mode).
OFF:
Do not allow re-recording in a different audio mode.
ON:
Allow re-recording in a different audio mode.
335
OUTPUT
REFERENCE SEL
Select the reference video signal to use.
REF:
Use the signal input to the REF. VIDEO IN connector as the reference video
signal. The input video signal to be edited is required to be in synchronization with the
reference video signal.
VIDEO:
Use the input video signal as the reference video signal.
326
AUTOMATIC IN
ENTRY AFTER
AUTO EDIT
Select whether or not to automatically set the OUT point of the previous edit as the next
IN point at the end of an automatic edit.
OFF :
No automatic setting.
R:
Set recorder IN point automatically.
R & P:
Set recorder IN point automatically, and also player IN point in two-VCR editing.
