Chapter 3
Recording and Playback
Chapter 3
Recording and Playback
49
2
Using the jog/shuttle dial, select the VIDEO PHASE CHECK item on
the SYSTEM MENU screen, then press the SET button.
The pictures from the two cameras are alternately displayed on the
LCD monitor (switched 30 times per second (DSR-70A)/24 times per
second (DSR-70AP)).
3
If the text displayed on the LCD monitor jitters, adjust the H PHASE
(horizontal phase) of one of the two cameras until the text stops
jittering. (Luminance signal phase adjustment)
4
If “NG” is displayed on the LCD monitor, adjust the SC PHASE
(subcarrier phase) of the camera to shorten the horizontal bar
(representing the magnitude of SC PHASE difference between the two
cameras) appearing by the “NG” indication.
When the horizontal bar is appropriately shortened, the “NG” changes
to “OK.”
5
When the adjustment is completed, press the MENU button to exit
from the VIDEO PHASE CHECK menu.
VIDEO PHASE CHECK
OK
