Chapter 7
Setup Menu
114
Chapter 7
Setup Menu
Extended Menu
Menu items in the 600s, relating to the time code generator (continued)
Menu items in the 700s, relating to video control
Item number
Item name
Settings
611
TC OUTPUT
PHASE IN EE
MODE
Select the timecode output mode for output from the TC OUT connector in E-E mode.
MUTE:
Mute the output.
THRU:
Output the timecode input to the TC IN connector as it is.
V-IN:
Output the timecode with the same phase as the input video signal phase.
V-OUT:
Output the timecode with the same phase as the output video signal phase.
612
TC OUTPUT
MUTE IN
SEARCH MODE
Select whether to mute the output from the TC OUT connector in search (jog/shuttle)
mode.
ON:
Mute.
OFF:
Do not mute.
613
VITC OUTPUT
Select the time code to be output as VITC.
OFF:
Do not output VITC.
TC:
Output TC after converting it into VITC.
VITC :
Output VITC.
705
EDGE
SUBCARRIER
REDUCER MODE
Select whether to enable the edge subcarrier reducer (ESR).
ON :
Enable.
OFF :
Do not enable.
When playing back a composite signal, set this to ON.
Item number
Item name
Settings
708
CHROMA PHASE
ROTATION MODE
Select the phase rotation mode for chroma phase control.
The effect of this setting applies to the output levels of all of the composite video, S
video, SDI (when the DSBK-160A is installed) and component video (when the DSBK-
170 is installed) signals.
U/V:
Select this setting when observing the unit’s composite video output level using a
composite vectorscope.
PB/PR:
Select this setting when observing the unit’s component video output level using
a component vectorscope.
713
VIDEO SETUP
REFERENCE
(DSR-70A only)
Select whether to remove the setup (7.5%) from the input analog video signals and
whether to add the setup (7.5%) to the output analog video signals.
714
Select the variable range of the VIDEO and CHROMA knobs when the PROCESS
CONTROL item in the sub LCD menu is set to PANEL.
–3 ~ +3:
–3 dB to +3 dB
WIDE:
–
∞
to +3 dB
Sub items
INPUT LEVEL
1
2 OUTPUT LEVEL
Whether to remove the setup from the input.
0.0%:
Do not remove.
7.5%:
Remove.
Whether to add the setup to the output.
0.0%:
Do not add.
7.5%:
Add.
710
INTERNAL VIDEO
SIGNAL
GENERATOR
Select the test signal to be output from the internal test signal generator. When SG is
selected using the VIDEO IN button, the internal test signal generator operates to output
the selected test signal. This signal can also be recorded.
BB:
Black burst signal
CB100 (DSR-70AP only):
100% color bar signal
CB75:
75% color bar signal
The factory default setting is CB75 (DSR-70A)/CB100 (DSR-70AP).
VIDEO ADJUST
RANGE
