Chapter 7
Setup Menu
Chapter 7
Setup Menu
113
Menu items in the 600s, relating to the time code generator
Item number
Item name
Settings
605
TCG REGEN
MODE
Select the signal to be regenerated when the time code generator is in the regeneration
mode (i.e., when the PRESET/REGEN item in the sub LCD menu general settings page
is set to REGEN, or the unit is in automatic edit mode).
TC&UB:
Both the timecode and user bits are regenerated.
TC:
Only the timecode is regenerated.
UB:
Only the user bits are regenerated.
607
U-BIT BINARY
GROUP FLAG
610
REGEN
CONTROL MODE
When editing with two DSR-70A/70AP units, if you use the control panel for editing
operation, select whether or not the timecode is automatically regenerated.
AS&IN:
In editing with this unit as the recorder, regardless of the settings of the TC INT/
EXT switch and sub LCD menu item PRESET/REGEN, in assemble and insert editing ,
the timecode generator regenerates according to the timecode on the tape.
ASSEM:
In editing with this unit as the recorder, regardless of the settings of the TC
INT/EXT switch and sub LCD menu item PRESET/REGEN, in assemble editing only,
the timecode generator regenerates according to the timecode on the tape.
MANU:
Regardless of whether this unit is the recorder or player, the timecode
generator operates in accordance with the settings of the TC INT/EXT switch and sub
LCD menu item PRESET/REGEN.
FULL:
Regardless of the REMOTE/LOCAL switch setting, when any of the ASSEMBLE,
VIDEO, AUDIO “CH1,1/2”, AUDIO “CH2,3/4”, and TC indicators is lit, the timecode
generator regenerates according to the timecode played back from the tape.
Select the user bits to be used in the time code generated by the time code generator.
000:
Character set not specified.
001:
8-bit characters compliant with ISO 646 and ISO 2022.
010:
Undefined.
011:
Undefined.
100:
Undefined.
101:
SMPTE 262M page/line multiplex system.
110:
Undefined.
111:
Undefined.
601
VITC POSITION
SEL-1
Select a line to insert the VITC in.
12H ... 16H ... 20H:
Select any line from 12 to 20. (DSR-70A)
9H ... 19H ... 22H:
Select any line from 9 to 22. (DSR-70AP)
Note
You can insert the VITC signal in two places. To insert it in two places, set both items
601 and 602.
602
VITC POSITION
SEL-2
Select a line to insert the VITC in.
12H ... 18H ... 20H:
Select any line from 12 to 20. (DSR-70A)
9H ... 21H ... 22H:
Select any line from 9 to 22. (DSR-70AP)
Note
You can insert the VITC signal in two places. To insert it in two places, set both items
601 and 602.
(Continued)