![background image](http://html.mh-extra.com/html/sony/cmt-z100dir/cmt-z100dir_operating-instructions-manual_420475013.webp)
CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)
1
GB
G
etting S
tar
ted
Voltage selector
For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.
For Latin American model, set
VOLTAGE SELECTOR to 120
127 V
or 220
240 V.
Power
Connect the power cord to a wall outlet.
The demonstration appears in the
main display. When you press
, the
system turns on and the demonstration
automatically ends.
If the plug does not fit the wall outlet,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
DAB Antenna (CMT-Z100DiR only)
With a DAB external antenna (not
supplied), you can obtain higher DAB
broadcast sound quality. We recommend
that you use the supplied DAB lead
antenna only temporarily until you install
a DAB external antenna.
Before unplugging the DAB antenna,
make sure the system is turned off to
preserve your own DAB settings.
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antennas.
Keep the antennas away from the power
cord and the USB cable to avoid picking
up noise.
Tip
This system can be installed on the wall
using the Wall-mount bracket SU-WL100
(not supplied). See “Installing the system on
the wall” (page 50) to wall-mount the system.
Inserting batteries
Slide and remove the battery
compartment lid, and insert the two
supplied R3 (size AAA) batteries,
side first, matching the polarities shown
below.
Notes
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Batteries installed devices shall not be
exposed to excessive heat such as sunshine,
fire or the like.
Continued