Sony CMT-Z100DIR Operating Instructions Manual Download Page 50

Page: 50 / 60

CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)

Installing the system on the wall

This system can be installed on the wall using the Wall-mount bracket SU-WL100

(not supplied).

To Customers

Sufficient expertise is required for installing this product. Be sure to subcontract

the installation to Sony dealers or licensed contractors and pay special attention

to safety during the installation. Sony is not liable for any damage or injury caused

by mishandling or improper installation, or installing any other than the specified

product. Your Statutory Rights (if any) are not affected.

To Sony Dealers

The following instructions are for Sony Dealers only. Be sure to read safety

precautions and pay special attention to safety during the installation, maintenance

and checking this product.

Before installing the system on the wall



Make sure that the wall is strong enough to support the wall mounting. The wall

should be able to support the weight of at least 20 times that of this system. See

“Specifications” (page 47) for the weight of this system.



Make sure that the power cord is disconnected from the wall outlet.



Make sure that the screws remain securely tightened during the assembly process, to

keep the system from falling or causing an accident.

Summary of Contents for CMT-Z100DIR





























































Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands

Sony CMT-Z100DIR, Operating Instructions Manual

Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands