CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)
1
GB
Listening to the radio
Note that the DAB tuning is only
available for CMT-Z100DiR.
1
Select “TUNER DAB”, “TUNER FM”
or “TUNER AM.”
Press FU/
repeatedly.
2
Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly
until “AUTO” appears, and then press
+/
(or TUNE +/
on the unit).
Scanning stops automatically when
a station is tuned in, and “TUNED”
and “STEREO” (for stereo programs
only) appear.
When tuning in an FM or AM station,
if “TUNED” does not appear and the
scanning does not stop, press
to
stop scanning, then perform manual
tuning.
When you tune in a DAB station or an
FM station that provides RDS services
(European model only), the service
name or station name appears on the
display.
For manual tuning (FM/AM band
only)
Press TUNING MODE repeatedly
until “AUTO” and “PRESET”
disappear, and then press +/
(or
TUNE +/
on the unit) repeatedly to
tune in the desired station.
Notes on DAB stations
When tuning in a DAB station, it may take a
few seconds before you hear any sound.
Primary service is automatically received
when secondary service ends.
This tuner does not support data services.
Tip
To reduce static noise on a weak FM stereo
station, press FM MODE repeatedly until
“MONO” appears to turn off stereo reception.
Running the DAB Automatic Scan
manually
1
Select “TUNER DAB”.
Press FU/
repeatedly.
2
Press TOOL MENU to start the DAB
Automatic Scan.
“Auto Scan?” and “Push ENTER”
appear.
