Sony CMT-Z100DIR Operating Instructions Manual Download Page 58

Page: 58 / 60

CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)

Confirm the completion of the installation.

Check the following points.



The hooks of the Mounting Hook are firmly latched in the holes of the Base Plate.



The power cord is not twisted or pinched.



The 2 screws that secure the Mounting Hook and the Base Plate are securely

tightened.

WARNING

Do not adjust the angle of the Mounting Hook when the system is installed on the wall and be sure

to install completely. It may cause the product to fall and result in injury or product damage. Also,

improper placement of the power cord, etc., may cause fire or electric shock through a short circuit.

Be sure to confirm the completion of the installation for safety.

System installation dimensions diagram

The diagram below shows the dimensions of the system that is mounted on the Wall-

mount bracket SU-WL100. Refer to the diagram below to determine the installation

location.

Unit: mm

Center point

535

213

240

186

Figures in the above diagram may differ slightly depending on the installation.

Summary of Contents for CMT-Z100DIR





























































Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands

Sony CMT-Z100DIR, Operating Instructions Manual

Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands