Sony CMT-Z100DIR Operating Instructions Manual Download Page 43

Page: 43 / 60

CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)

Additional I

ma
tion

Messages

One of the following messages may

appear or flash in the main display

during operation.

Can’t Play

You tried to play a disc that this system

cannot play.

Complete!



The radio preset operation ended

normally.



The audio file or folder on the USB

device has been erased.



The DAB Automatic Scan ended

normally.

Data Error

You tried to play a file that is not playable.

Device Full!

The USB device is full.

Erase Error!

Erase of audio files or folders on the USB

device failed.

Error

The USB device could not be recognized

or an unknown device is connected

(page 22).

Fatal Error!

The USB device has been disconnected

while transferring, recording, or erasing

audio files or folders on the USB device.

FLDR Full

The number of folders on the USB device

has reached the maximum.

LOCKED

The system does not eject the disc.

Contact your nearest Sony dealer.

No Device

The USB device is either not connected,

stopped, or is having a problem.

No Disc

There is no disc in the player, or you have

loaded a disc that cannot be played.

No Memory

The memory selected for playback or

transfer has no memory media inserted

in the USB device.

No Preset (DAB only)

There is no stored preset station.

No Service (DAB only)

There is no supported DAB broadcast in

your country or region.

Continued



Summary of Contents for CMT-Z100DIR





























































Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands

Sony CMT-Z100DIR, Operating Instructions Manual

Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands