CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)
1
GB
G
etting S
tar
ted
Setting the clock
Use buttons on the remote to set the
clock.
1
Turn on the system.
Press
/
.
2
Select the clock set mode.
Press TIMER MENU.
If “PLAY SET?” flashes, press
/
repeatedly to select “CLOCK SET?,”
and then press ENTER.
3
Set the time.
Press
/
repeatedly to set the hour,
and then press ENTER.
4
Use the same procedure to set
the minutes.
Note
The clock settings are lost when you disconnect
the power cord or if a power failure occurs.
To display the clock when the system
is off
Press DISPLAY. The clock is displayed for
about 8 seconds.
