Sony CMT-Z100DIR Operating Instructions Manual Download Page 44

Page: 44 / 60

CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)

No Step

All of the programmed tracks or files

have been erased.

No Track

Playable file on the USB device is not

loaded in the system.

Not in Use

You tried to perform a specific operation

under conditions where that operation is

prohibited.

Not Supported

An unsupported USB device is

connected.

Protected!

You tried to perform transfer, recording

or erase operation against a write-

protected USB device.

Push STOP!



You have pressed PLAY MODE during

playback.



You have pressed the buttons whose

operation is only possible when

playback is stopped.

Reading



The system is reading information

of the disc. Some buttons are not

available.



The system is recognizing the USB

device.

REC Error!

Transferring did not start, stopped

partway, or otherwise could not be

performed (page 39).

Step Full!

You tried to program more than 25 tracks

or files (steps).

TIME NG!

The on time and off time of Play Timer or

Rec Timer is the same.

Track FULL

The number of files on the USB device

has reached the maximum.

Summary of Contents for CMT-Z100DIR





























































Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands

Sony CMT-Z100DIR, Operating Instructions Manual

Search results

Summary of Contents for CMT-Z100DIR

Reviews:

Related manuals for CMT-Z100DIR

Brands by name

Popular brands