CMT-Z100iR/Z100DiR.GB.4-140-444-12(1)
GB
Oper
ations
3
Set the USB device to stand by
for recording.
Press REC TO USB on the unit.
“Please Wait” appears and the display
cycles between “
MB Free” or
“
GB Free” (free space on the USB
device) and “Push ENTER.”
The USB device stands by for
recording.
Note
It may take a while for the USB device to stand
by for recording. Therefore, it is recommended
that you allow for enough time to not miss
any recording opportunity, especially when
recording the source from a tuner.
4
Start recording.
Start playback of the source you want
to record, then press ENTER.
“REC” lights up and recording starts.
To stop recording
Press
.
To mark track numbers
You can mark the track numbers during
recording of any source.
Press REC TO USB on the unit at the
point you want to add a track mark.
The system pauses recording for a while
and adds track mark, showing message
“New Track.” No sound is recorded
during pause time.
Note
The track numbers are automatically marked
when you record more than 60 minutes.
Folder and file generation rules
When first recording the analog audio
to the USB device, a “MUSIC” folder
is created directly below the “ROOT”
folder.
Folders and files are generated within this
“MUSIC” folder as follows.
Music
source
Folder name
File name
Tuner
“TUFM0001”*,
“TUAM0001”*
or
“TUDB0001”*
“TRACK001”*
AUDIO IN “EXAU0001”* “TRACK001”*
* Folder and file numbers are assigned serially
thereafter.
Note
Recording stops automatically when:
you change the function.
you change the band.
you turn off the system.
the USB device runs out of space during
recording.
the number of files or folders on the USB
device reaches the limit for the number
that the system can recognize.
