![background image](http://html.mh-extra.com/html/sony/cmt-ah10/cmt-ah10_instruction-manual-and-warranty_420262094.webp)
1Prepare the sound source you want to record.
2Insert an MD or tape for recording.
8 Press the STANDBY button.
Preset reception.
radio
please note
Turn on the power of the device
connected to LINE IN.
Waking up to music (alarm timer) (continued)
To stop timer playback halfway
Press the ?/1 button to turn off the power.
After confirming the reserved content or
pressing the TIMER/INSERT button to change,
Listening to other audio sources after
making a reservation If you turn on the power, you
can perform normal operations. Turn off the power before
the reserved time. The timer function will not work unless
the power is turned off.
LINE IN
3 When recording to MD, use the
menu to set the disc mode to
“Hi-MD” or “MD” for a blank
disc (page 90). Also, press
the REC MODE button to
select the recording mode.
See pages 30-31 for details.
Record using a
timer
Tip • If you
make a mistake in the settings, press the NO•CANCEL
button . The last setting will be lost, so please set it
again. • To cancel the reservation standby mode,
press the STANDBY button and the “ ” disappears from
the display window. • Reservations will be retained
unless otherwise set. • is a display indicating that the
wake-up timer is active
You can use the timer to record the sound of a radio or
connected device. This is convenient when you cannot record
on the spot, such as when you are away or late at night. Set the
clock of this unit before operating (page 24). If “ ” or “ ” appears
in the display window before operation, press the STANDBY
button to turn it off .
Press the YES•ENTER/MENU button. Each time the button is
pressed, the reservation details are displayed in the order in
which they were set. If you want to change it, display the
contents and redo the settings from there to step 8. Even if you
press the STANDBY button partway through, the changes will
not be recorded.
Preparation
be.
If you insert an MD that has already been recorded, it
will be recorded after the recorded part. Insert the
tape with the side you want to record facing up.
“ ” will be displayed and the device will be in reservation
standby mode. Playback will start automatically at the set
time, the power will turn off at the end time, and the
device will return to the reservation standby mode.
When recording on a tape, select “Single-sided
recording” or “Double-sided recording”. For details, see
steps 2 and 3 on page 83 .
sound source
(Recording timer)
94 timer
Alarm timer and recording timer cannot be reserved at the
same time.
is shown.
Machine Translated by Google