![background image](http://html.mh-extra.com/html/sony/cmt-ah10/cmt-ah10_instruction-manual-and-warranty_420262106.webp)
• Once a song has been recorded at high speed, it cannot be recorded at high
speed again for 74 minutes . (page 123) • High-speed recording is not
possible because the MD does not have enough recording time for one track.
("Disk is full" is displayed)
“F” (page 59).
symptoms
Check item
Troubleshooting (Continued)
A track that should have been recorded
at high speed was not recorded.
• There is not enough remaining recording time on the MD. ("Disk is full.
• If you stop recording in the middle of a song, that song will not be recorded.
• The resume playback function is working. c From
the menu operation, select "Settings" - "Resume" - "Resume On".
is displayed) cErase unnecessary
tracks or replace with another MD.
Cannot be edited on other models.
• A power failure occurred during recording or while “Writing system file” was displayed,
or the power cord was unplugged from the outlet. cRe -record from the beginning.
• Edit on a device that does not support Hi-MD or MDLP recording mode.
• With CD-R/CD-RW, it may not be possible to record to MD depending on the condition
of the disc and the recorder used for recording.
• A mode other than “Normal Play” is selected in the main playback mode.
I tried
be. Or, a mode other than normal playback is selected in sub playback mode.
cSelect “Normal Play” in the main playback mode. Select normal playback in sub
playback mode (page 60). • “Repeat play” is selected. cHold down the MODE
button on the remote control until “ ” disappears . (page 64).
Cannot record at high speed.
cUse this unit or another device that supports Hi-MD or MDLP mode to edit.
Cannot record.
Momentary noise occurs during recording.
• The MD is in the accidental erasure prevention state. (page 118) c
Return the MD's accidental erasure prevention knob to close the hole.
• The volume was too loud when recording. c
Lower the volume and record. • A very dirty CD
was recorded at high speed. c Record at normal
speed.
• In LP4 stereo recordings, due to the characteristics of the compression method,
momentary noise may occur on very rare occasions, depending on the source of
the recording. cStereo recording or LP2 stereo recording.
• A playback-only MD is inserted. (“This is a read-only disc” is displayed.)
The recorded sound skips.
Noise appears in the recorded sound.
Does not play from the first track on the disc.
c ) Replace with
an MD for recording.
106 Troubleshooting
Machine Translated by Google