![background image](http://html.mh-extra.com/html/sony/cmt-ah10/cmt-ah10_instruction-manual-and-warranty_420262023.webp)
Prepare the remote control
Connection and Preparation
3Connect the power cord
Note Do
not expose the remote control sensor to direct sunlight or strong light from lighting
fixtures. You may not be able to operate the remote control.
please note
About battery replacement
How to assemble the AM loop antenna
1Connect the connection cord from the right
speaker to the SPEAKER OUT (POWER
IN) terminal on the main unit.
Lithium battery CR2025 (sold separately)
twenty three
Pull out the insulation sheet to make the remote control
ready for use. Batteries are already installed in the
remote control.
As the batteries run down, the distance that the remote
control can operate becomes shorter. Follow the steps
below to replace the batteries with new ones. It lasts
about 6 months with normal usage . 1 Remove the
battery case.
Connect the cord plug to the wall outlet.
2 Replace the lithium battery CR2025 with a new
battery with the side labeled + facing up .
2 Power supply from the right speaker
3 Replace the battery case.
Connection and preparation
When unplugging the power cord, turn off the
power to the main unit before unplugging it. If
there is a power failure, the contents of the
memorized clock, timer, etc. may be lost. If the
memorized contents are erased, set them again.
Machine Translated by Google