
• SonicStage software is running. c Quit the SonicStage
software before operating.
No sound comes out of the computer.
stomach.
Page 95) •
The start time and end time of the timer are the same. c Readjust
the set time. • Turn off the power one minute before the
scheduled recording time while waiting for the recording timer reservation .
• Turn off the power before the reserved time while waiting for the alarm
timer reservation.
when.
• You are trying to save to your disc in MD mode.
• While connecting to a computer, sound is played from the speakers or
headphones connected to the unit. c Press the PC MODE button, and
check that the connection with the computer has disappeared from the
display window of the unit. (page 99)
Unstable operation while connected.
c Replace the disc with a Hi-MD mode disc.
The computer's playback volume is low.
• You are using a USB hub or USB extension cable.
• Raise the computer's volume to maximum (MAX).
cOperation cannot be guaranteed. Only with the included dedicated USB cable
When connected to a computer,
the unit is not recognized by the computer.
Connect directly to your computer.
Timer doesn't work.
• The USB cable on the computer side is
disconnected. c Reinsert the USB cable. • Install
the software “SonicStage” using the supplied CD-ROM.
Data other than music data can be saved.
Please stall. cFor details,
refer to the separate “Software Installation and Basic Operation Guide.”
do not have.
• Set your clock to the correct time. (page 24) • There
was a power outage. • Confirm that “ ” or “ ” is
displayed. (94,
Do".
Connection with PC
Timer (clock) section
Troubleshooting (Continued)
• Reinsert the USB cable and restart SonicStage. The display
of the unit shows that it is connected to the computer ( page 99 ), but the SonicStage software
recognizes the unit. do not do.
symptoms
Check item
Check item
symptoms
108 Troubleshooting
Machine Translated by Google