Sony CMT-AH10 Instruction Manual & Warranty Download Page 99

Page: 99 / 128

2 Remove the dedicated USB cable.

be.

The USB speaker function may not work properly on

some computers. • While playing as a USB speaker,

the dedicated

In Windows 2000, go to

Control Panel -> Sound and Multimedia

Properties -> Audio tab -> "Preferred Device for

Sound Playback:" and confirm that "USB Audio

Device" is displayed.

1 Confirm that the BUSY lamp is off.

2 Remove the MD.

Do not disconnect the USB cable or turn off the power.

You can listen to the sounds played back on your computer,

such as MD songs loaded into this unit or songs imported

to software, through the speakers connected to this unit in

the same way as listening to your computer.

In Windows XP, check

that "CMT-AH10" is displayed in Control Panel

ÿ Sounds and Audio Devices Properties ÿ Audio

Tab ÿ "Sound Playback Default Device:".

• Depending on the characteristics of the connected

computer, noise may be heard during playback or the

computer may not work properly.

The display window on the unit will change to indicate

that the unit has been successfully connected to the

computer.

• Power with Transmeta Crusoe processor

be.

1 Confirm that the BUSY lamp is off.

please note

If you connect to

a computer while “MD” is displayed in the tip display window ,

the display will change even if you do not press PC MODE in

step 4.

• Remove the dedicated USB cable except when connecting

to a computer .

Note • If

you turn on or restart your computer while the power of this

unit is on, your computer may not start up. In that case,

turn off the power of this unit or disconnect the dedicated

USB cable, and then restart the computer.

Continued on next page

• Do not operate the device or disconnect the dedicated USB

cable while the BUSY lamp on the device is lit.

4 Press the PC MODE button.

1Check the computer settings.

When disconnecting the dedicated USB cable

When ejecting the MD

3 Connect this unit and computer to the

Connect with a USB cable.

Using by connecting to a computer 99

(USB speaker function)

Listen to the sound of the

connected computer

Using by connecting to a PC

Machine Translated by Google

Summary of Contents for CMT-AH10

































































































































Search results

Summary of Contents for CMT-AH10

Reviews:

Sony CMT-AH10, Instruction Manual & Warranty, Page: 99 / 128

Search results

Summary of Contents for CMT-AH10

Reviews: