CD player part
model
MD deck
model
Side A
Claw on side A
Claw on side B
(CLV and CAV) error
correction method Hi-MD:
compact disc digital audio system
laser
When using the tape for a long time, a tape
that exceeds 90 minutes is convenient for long-term use, but it is
thin and stretches easily. Note that repeated jerky running,
stopping, fast-forwarding, and rewinding may cause the tape to get
caught in the machine.
Protecting important recordings - If you break the
accidental erasure prevention tab, recording will not be possible, so you can
prevent the mistake of accidentally erasing the recorded contents. Even if
the tab is broken, you can record again by covering the hole with cellophane
tape.
laser)
Semiconductor laser
(ÿ=790nm)
Recording playback time
When using HMD1G (1GB): up
to 34 hours in stereo
Number of channels: 2 channels Wow and
flutter measurement limit (JEITA*) Frequency response: 20
to 20,000 Hz +1/-2 dB
After long periods of use, the head may become dirty, resulting in
poor sound, interruptions, or the inability to record. To enjoy stereo
recording and playback with better sound, clean the head, capstan
and pinch rollers with a commercially available cotton swab and
cleaning solution after about 10 hours of use .
When using MDW-80 in Hi-MD
mode : Stereo maximum 10 hours
10 minutes
Degaussing the recording/
playback head If the recording/playback head is used for a long
period of time, or if a magnetic screwdriver comes in contact with
the head, the head will become magnetized, causing a rumbling
noise to occur during recording or playback. If this happens, use a
commercially available head demagnetizer to degauss the
recording/playback head.
Sampling frequency 44.1kHz
number of revolutions
When using MDW-80 in MD
mode : Monaural maximum 160
minutes (playback only) Stereo
maximum 320 minutes
Continued on next page
(LP4)
About 350rpm-3600rpm
Minidisc digital audio system
Disc Minidisc Recording
method Magnetic field modulation overwrite method
Reproduction reading method
Non-contact optical reading (semiconductor
others
Tape part
head cleaning
Main Specifications
ACIRC (Advanced
LDC (Long Distance
Cross Interleave Reed
MDs:
(Hi-LP)
Indicator Subcode)
(JEITA*)
(Hi-LP)
Solomon Code)
Code)/BIS (Burst
Other 119
Machine Translated by Google