Just a word
• At the time of purchase, it is
set to always create a new
group for recording. A track
number (track mark) is
attached to the MD when
recording starts, and a group
is formed up to the point
where recording ends. To
record without creating a group,
set “Group Recording Off” (“
Recording by creating a new
group” on page 68). • You can
add song titles and group names
while recording.
For Hi-MD, the artist name
and album name can also be
added (pages 71-73). • If the
clock is set, the recording date
and time are automatically
recorded on the MD (page
24). • Erasing tracks recorded on MD
When MD ends in the middle of recording ,
both MD and tape automatically stop.
Note •
After stopping recording, do
not unplug the power cord
or move the unit while
"Writing system file" is
flashing. It may not be
recorded. • “PCM recording”,
“Hi-SP recording”
see “Erasing Songs and
Groups ” (page 78).
"Audio", "Hi-LP recording",
"LP2 recording", or "LP4
recording" will be displayed as
"Hi MD Disc" or "LP:" if you try
to play or edit it on a device
that does not support each of
them. is displayed and cannot
be played or edited. • Even if
you adjust the volume or sound
quality during recording, the
recorded track will not be
affected. However, please note
that if the volume is too loud, it
may cause the sound to skip.
Recording the entire tape onto an MD (TAPE-MD synchronous recording) (Continued)
42 You can use it even if you only read here
Other operations
I/1
I/1
Power on/off
When "disk space is full" is displayed
In such a case
stop recording
x
x
button to push
There is not enough free space on the disk to record any
more.
If other messages are displayed, see pages 110-116.
Machine Translated by Google