Sony CMT-AH10 Instruction Manual & Warranty Download Page 104

Page: 104 / 128

• Press the I/1 button to turn on the power. •

Firmly insert the power cord plug into the outlet. • Adjust volume. • When

listening through speakers, remove headphones from the i terminal. • Wait

until “Reading” disappears. • If the PC MODE button is pressed and the USB

speaker function is

• A device that emits radio waves, such as a mobile phone, is being used nearby.

8cm CD cannot be played. I can't

take it out.

• The resume playback function is working.

There is noise.

Does not play from the first track on the disc.

No sound.

Press the ENTER button in order. The settings will be reset, so press the CDZ

button afterwards.

cPress the PC MODE button. (page 99) • Firmly insert

the dedicated speaker connection cord.

be. Or, a mode other than normal playback is selected in sub playback mode.

cSelect “Normal Play” in the main playback mode. Select normal playback in

sub playback mode (page 60). • “Repeat play” is selected. cHold down the

MODE button on the remote control until “ ” disappears . (page 64).

be.

• Even though an 8cm CD is inserted, the message "There is no disc" may appear

and playback may not be possible, or the 8cm CD may not be ejected . In that

case, hold down the PC MODE button and press the TUNE- button, CANCEL

button,

cUse mobile phones, etc., away from this unit.

c Select “Settings” - “Resume” - “Resume Off” in the menu operation (page

59). • A mode other than “Normal Play” is selected in the main playback

mode.

common

Troubleshooting (Continued)

CD section

symptoms

Check item

symptoms

Check item

104 Troubleshooting

Machine Translated by Google

Summary of Contents for CMT-AH10

































































































































Search results

Summary of Contents for CMT-AH10

Reviews:

Sony CMT-AH10, Instruction Manual & Warranty, Page: 104 / 128

Search results

Summary of Contents for CMT-AH10

Reviews: