Sony BVP-570, Maintenance Manual

Page: 71 / 806

4-5 (E)
BVP-570
4-1. Preparation
On the Side Panel:
VTR SAVE/STBY switch
→
STBY
GAIN switch
→
L (0 dB)
OUTPUT/DCC switch
→
CAM/OFF
WHITE BAL switch
→
PRST
On the Front Panel:
SHUTTER switch
→
OFF
Filter Setting: 3200 K
OHB-550/550WS/455WS series
→
1B (FILTER selector)
BVP-570WSPK
→
1B (FILTER selector)
OHB-450/451/T450WS series
→
1 (FILTER selector)
4-1-6. Initial Setting
Internal Switches:
n
When switching the following switches from a customer-
set position, it is recommended to record the setting state
of the customer in the table below.
After adjustment is complete, be sure to return the switches
to their customer-set positions.
Board Switch Initial setting Customer-set position
AT-126 S1-1 ON
S1-2 OFF
S1-3 ON
S1-4 OFF
Setup Menu:
n
Be sure to recall the standard file before making the
following settings by the setup menu.
.
MENU: Operation
Page Item Initial setting
Gain Sw (?3) Low 0 dB
Middle 9 dB
High 18 dB
Wide Screen (?4) * 1 16:9/4:3 Mode 16:9
* 1 : This setting shall be done only when the OHB-455WS/455WSP/
T450WS/T450WSP/550WS/550WSP or BVP-570WSPK are used.
.
MENU: Paint
Page Item Initial setting
Video Level(P1) Test Off
Detail 1(P2) Dtl On
Skin Detail (P4) Master SW Off
Gamma(P5) Gamma On
W.Clip/Knee(P6) W.Clip. Off
Knee Off
Matrix(P7) Matrix Off
n
Be sure to execute the reference file store after making the
above settings by the setup menu.
MENU : Trimming File
PAGE : Trimming File (T1)
ITEM : File Store
(Press the MENU SEL switch twice
to execute.)