5-1 (E)
BVP-570
5-1. Preparation
5-1-1. Equipment Required
Measuring Equipment
.
Frequency counter
Advantest TR5821AK or equivalent
.
Oscilloscope
Tektronix 2465 or equivalent
.
Waveform/Vector monitor
Tektronix 1750 or equivalent (for NTSC)
Tektronix 1751 or equivalent (for PAL)
.
Digital voltmeter
Advantest TR6845 or equivalent
.
Video signal generator
Tektronix 1410 or equivalent (for NTSC)
Tektronix 1411 or equivalent (for PAL)
3
2
4
5
1
0.5
6
7
8
9
10
0.5
Section 5
Overall Electrical Alignment
.
Color monitor
Sony BVM-1911/2811 or equivalent (for NTSC)
Sony BVM-2011P/3011P or equivalent (for PAL)
Peripheral Equipment
.
CCD unit OHB-450/T450WS/550 series
*
1
.
Camera adaptor CA-530/550/570 series
.
AC adaptor AC-550/550CE
.
Master setup unit MSU-700
.
Camera control unit CCU-700A/700AP
*
1 : The OHB with the specified serial number, requires additional
adjustments described in separately available manual.
For details, see to Section “1-1-1. Note on OHB Installation”.
5-1-2. Notes on Adjustment
When performing the adjustment, read throughly the
following comments.
1.
The calibration of all measuring equipment should be
completed.
2.
The alignment of OHB, CA and MSU should be also
completed.
3.
To connect each equipment, refer to Section 5-1-4.
4.
As for initial settings before beginning adjustment,
refer to Section 5-1-6.
5.
About ten-minute warm-up time is allowed before
beginning adjustment.
6.
Turn off the power before extending the plug-in board
using the extension board.
7.
When using the camera in 16:9 mode together with the
16:9/4:3 switchable OHB and performing adjustments
other than VA gain adjustment, use a 16:9-grayscale
chart (Sony P/N : J-6394-080-A).
8.
Paste a black colored velvets (around 3
x
3 cm) to
both sides of the full white portion in the center of a
transparent grayscale chart.
(For more details, contact your local Sony Sale Office/
Service Center.)
9.
When connecting the MSU-700 to the BVP-570, use
the MSU-700 for various settings, because the switch-
es on the side panel of the camera become invalid.
10. Never change the setting of the following trimmer
capacitors. These capacitors are extremely difficult to
adjust in the field.
VA-163A board :
1
CT200,
1
CT300,
1
CT400
Multiburst Chart
Sony P/N: J-6026-110-A
Grayscale Chart (4:3)
Transparent chart
Sony P/N: J-6026-130-B
Reflective chart
(refer to Section 5-1-3.)
Grayscale Chart (16:9)
Transparent chart
Sony P/N: J-6394-080-A
Extension board EX-464 (option)
Sony P/N: J-6395-040-A
For plug-in boards
Pattern box PTB-500
Sony P/N: J-6029-140-B
Power supply AC90 to 240V
(When a transparent chart is
used)
Summary of Contents for BVP-570
