Sony BVP-570, Maintenance Manual

Page: 50 / 806

3-4 (E)
BVP-570
Page Ver. Item Settings Contents
Gain SW Low –3,
[0]
, 3, 6, 9, 12, Selects the gain value for each gain switch position.
18, 24, 30 dB (Low, Middle, High)
Middle –3, 0, 3, 6,
[9]
, 12,
18, 24, 30 dB
High –3, 0, 3, 6, 9, 12,
[18]
, 24, 30 dB
Wide Screen 16:9/4:3 Mode
[16:9]
, 4:3 Selects the aspect ratio for the video signal output.
(For OHB-455WS/ (This setting is valid only when the camera is used alone.) b)
550WS/T450WS
VF Aspect
[Auto]
, 4:3 Selects the aspect ratio for the viewfinder indication.
series)
Auto : Automatically selects according to the aspect ratio selected by
16:9/4:3 Mode on the Wide Screen page.
4:3 : Selects 4:3 regardless of the 16:9/4:3 MODE setting.
4:3 Safety On,
[Off]
Selects whether the safety zone marker showing the 4:3 area is
indicated in the 16:9 mode, or not.
a)
16:9 ID On VF On,
[Off]
Turns on and off the 16:9 indication in the 16:9 mode on the viewfinder
screen.
(This setting is valid only when the DISP switch is set to ON or OFF.)
16:9 ID On,
[Off]
Selects whether the 16:9 indication is displayed on the internal color-bar
On Bars in the16:9 mode, or not.
(This setting is valid only when the DISP switch is set to ON or OFF.)
MON Out BNC Test Out
[CAM|VBS]
, RM VBS, Selects a video signal to be output at TEST OUT connector.
VF Y CAM VBS : Color composite signal
RM VBS
: The same as a signal ouput to RM-P9
Y : Y(monochrome) signal
RM/MON CHAR
[On]
, Off Selects whether character signals displayed on the viewfinder screen
are mixed with the VBS signal to be output to RM-P9, or not. Turning on
is convenient to operate the setup menu by RM-P9.
VBS Lock On,
[Off]
Used to prevent misoperation by ENC/RGB switch.
On
: ENC signal is output at TEST OUT connector regardless of
ENC/RGB switch setting.
Off : A signal selected by ENC/RGB switch is output.
VF Video
[Y]
, MIX Selects a video signal to be output to the viewfinder.
Mode Y : Y = 0.3R + 0.59G + 0.11B; The same as a camera output signal
MIX : Y = 0.33R + 0.33G + 0.33B
[RGB]-G On,
[Off]
Sets signals selectable by RGB switch.
On
: R-G, B-G
Off : R, G, B
a) In the 16:9 mode, the following kinds of safety zone marker can be selected in combination of the settings of “Safety Zone” and “4:3
Safety”.
Safety Zone
80% 90% Off
4:3
Safety
On
Off Not indicated
b) The change of aspect ratio using this menu is disabled because the CCU’ s setting has a priority when the CCU is connected.
If you want to change the aspect ratio when the CCU is connected, use the Others page of the Paint menu. When you attempt to
change using this menu, a message “Use Paint MNU” is displayed.
16:9
4:3 area
Safety
zone
3-1. Setup Menu
3-1-1. Operation Menu