Sony BVP-570, Maintenance Manual

Page: 64 / 806

3-18 (E)
BVP-570
Page Ver. Item Settings Contents
Others1 Filter,
[On]
, Off On : A total of 8 settings of the white balance value can be saved
WHT MEM in conbination with the CC filter and WHITE BAL switch settings.
Off : One white balance value can be saved for the WHITE BAL
switch setting A or B, for a total of 2 settings.
NTSC ENC
[Wide]
, Narrow Sets the band width of the Q signal for the NTSC color encoder.
Rotation
[STD]
, RVS Selects the mode of MENU SEL switch (as turned counterclockwise
when viewed from the front.)
STD : Cursor moves downwards and a numeric value increases.
RVS : Cursor moves upwards and a numeric value decreases.
Own Call R, F&R , Off Selects whether one or two TALLY lamps are lit corresponding to the
CALL button of camera adaptor pressed, or not. Or selects which
TALLY lamp is lit when the CALL button is pressed.
(This setting is valid in connection with CCU. When the camera is used
alone and MSU/RCP is not connected to the camera, it is always set to
OFF.)
R
: Rear TALLY lamp is lit.
F&R : Rear and front TALLY lamps are lit.
Off
: No TALLY lamp is lit corresponding to the CALL button.
Center MKR H _ 20 to 20 (
[XX]
) Shifts horizontally the location of the center marker on the screen.
20 (right)
↔
_ 20 (left)
Center MKR V _ 20 to 20 (
[XX]
) Shifts vertically the location of the center marker on the screen.
20 (up)
↔
_ 20 (down)
Lens VTR S/S Talk,
[RET2]
Selects the mode of VTR S/S SW of the lens and camera.
Talk
: VTR S/S SW of lens functions as INCOM TALK SW
(momentary) and that of the camra as RET2 SW.
RET2 : VTR S/S SW of lens functions as RET2 SW and that of the
camera as INCOM TALK SW.
VF ? Display
[On]
, Off Turns on and off the indication of ? mark at the top-right of the VF
with the DISP switch set to ON when the self-diagnosis result is NG (no
good) and so on.
PinP RET RVS
[RVS1]
, RVS 2, Off Selects the indication mode of VF display in PinP mode. (Does not
function in the unit.)
3-1. Setup Menu
3-1-6. System Config Menu