Sonardyne UM-8300-Compatt 6 User Manual Download Page 11

Page: 11 / 141

Amendment History

The amendment history records all amendments and additions made to this manual.

Issue

Revision

Date

Comments

Section

Page

30/09/2010

First Issue

All

30/11/2010

Minor Changes

All

07/12/2010

Removed Section 4.2 – changing the
inclinometer scaling range as this no longer
applies for 6th Generation Transponders. Other
minor typographical changes.

4.2

17/01/2011

Improved drawing resolution and details in
Section 15. Section 4.1 inclinometer endcap
drawing and mounting instructions clarified.

4.1, 15

21/01/2011

Improved the wording consistency.

18/02/2013

Reformatted the manual. Improved overall
construction and consistency. Include new 6G
Terminal Lite Software.

All

19/08/2013

ECN12238

Stock code for PCBs in recommended spares
listing changed.

Section 6.3 External Connector Pin-Out.

6.3

111

25/10/2016

OB11543/11657

Maintenance Section updated.

Storage details added.

References to iWAND added.

References to battery disconnect fob added.

Outline Drawings updated.

Sections re-organised and general update.

7.5

All

13.13

All

88–110

All

24/04/2019

General update

All

User Manual for the Type 8300 Compatt 6
(and Variants)

UM-8300-Compatt 6

Issue B3

Summary of Contents for UM-8300-Compatt 6














































































































































Search results

Summary of Contents for UM-8300-Compatt 6

Reviews:

Related manuals for UM-8300-Compatt 6

Brands by name

Popular brands

Sonardyne UM-8300-Compatt 6, User Manual

Search results

Summary of Contents for UM-8300-Compatt 6

Reviews:

Related manuals for UM-8300-Compatt 6

Brands by name

Popular brands