1. SICHERHEITSHINWEISE
GEFAHR
Die Installation des Antriebs muss von einem Fachmann
für Gebäudeautomation unter Einhaltung der am Ort der
Inbetriebnahme geltenden Vorschrien ausgeführt wer-
den.
Die Nichtbeachtung dieser Anweisungen kann zu schwe-
ren Verletzungen wie zum Beispiel Quetschungen durch
das Tor führen.
1.1. Warnhinweis - Wichtige Sicherheitshinweise
WARNUNG
Für die Gewährleistung der Sicherheit von Personen ist
es wichtig, dass diese Hinweise befolgt werden, da es bei
unsachgemäßer Installation zu schweren Verletzungen
kommen kann. Bewahren Sie diese Sicherheitshinweise
gut auf.
Der Monteur muss unbedingt alle Benutzer unterweisen,
um eine sichere Verwendung des Antriebs gemäß den
Anweisungen der Bedienungsanleitung zu gewährleisten.
Dem Endnutzer müssen Montage- und Gebrauchsan-
weisung übergeben werden. Der Monteur muss den
Endnutzer explizit darauf hinweisen, dass Installation,
Einstellung und Wartung des Antriebs von einer fachlich
qualifizierten Person für Antriebe und Gebäudeautomati-
on ausgeführt werden müssen.
1
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.
DE
Axovia 220B RTS
DEUTSCHE ÜBERSETZUNG DES HANDBUCHS
INHALT
ALLGEMEINES
Sicherheitshinweise
Gefahr
Weist auf eine Gefahr hin, die sofort zu schweren bis tödlichen Verletzungen führt.
Warnung
Weist auf eine Gefahr hin, die zu schweren bis tödlichen Verletzungen führen kann.
Vorsicht
Weist auf eine Gefahr hin, die zu leichten bis mittelschweren Verletzungen führen kann.
Achtung
Weist auf eine Gefahr hin, durch die das Produkt beschädigt oder zerstört werden kann.
1. Sicherheitshinweise
1
1.1. Warnhinweis - Wichtige Sicherheitshinweise
1
1.2. Einleitung
2
1.3. Prüfungen vor der Installation
2
1.4. Gefahrenvermeidung
2
1.5. Elektrische Installation
3
1.6. Sicherheitshinweise bei der Installation
3
1.7. Normen
3
1.8. Support
3
2. Produktbeschreibung
4
2.1. Außenmaße des Antriebs (in mm)
4
2.2. Technische Daten
4
2.3. Beschreibung und Funktion der LEDs
4
3. Vor der Montage zu prüfende Punkte
5
3.1. Tor
5
3.2. Pfeiler
5
3.3. Verstärkungsschienen
5
3.4. Bestimmungsgemäße Verwendung
5
4. Vorbereitung und Bohrungen an den Pfosten
5
5. Zusammenbau und Befestigung der Antriebe
6
6. Installation der integrierten Öffnungsbegrenzung
7
7. Elektrische
Anschlüsse
8
7.1. Einbau der Kabeldurchführungen
8
7.2. Anschluss der Antriebe
8
7.3. Anschluss der Antenne
8
7.4. Anschluss des Netzstromkabels
8
7.5. Verriegelung der Arme
8
7.6. Einschalten der Anlage
8
8. Schnelle
Inbetriebnahme
9
8.1. Programmierung der Funkhandsender
9
8.2. Wahl der Funkhandsendertasten
9
8.3. Speicherung einer Taste für die Komplettöffnung des Tors
9
8.4. Aktivierung einer Taste für die Fußgängeröffnung
9
8.5. Einlernen des Torwegs
9
9. Bedienung
10
10. Erweiterte Einstellungen
10
10.1. Aktivieren des automatischen Zulaufs
10
10.2. Wechsel vom sequenziellen Modus zum automatischen Schließmodus
11
10.3. Programmierung eines Funkhandsenders mit 3 Tasten
11
11. Anschließen von Peripheriegeräten
11
11.1. Allgemeiner Schaltplan
11
11.2. Verkabelung von Lichtschranken
11
11.3. Gelbe Signalleuchte
12
11.4. Außenantenne
12
11.5. Schlüsselschalter
12
11.6. Gegensprechanlage
13
11.7. Notstrombatterie
13
11.8. Umfeldbeleuchtung
13
11.9. Digicode
13
12. Solarstromversorgung
13
12.1. Anschluss an die Stromversorgung
14
12.2. Hinweise zur Benutzung
14
13. Diagnose und Störungsbeseitigung
14
13.1. Lichtsensor
15
13.2. Einstellungen löschen
15
13.3. Einstellungen und programmierte Funksender löschen
15