4)
Starten Sie einen weiteren Öffnungs-/Schließzyklus. Beide Torflügel
schließen sich gleichzeitig. Nach Abschluss des zweiten Schließvor-
gangs leuchtet die LED
=
=
ununterbrochen.
Achtung
Wenn die LED
=
=
nach 2 vollständigen Öffnungs-/Schließzyklen
blinkt, die Hilfe zur Fehlersuche zu Rate ziehen.
......
1
3
4
1
12
13
14
=
=
=
=
Achtung
Während des automatischen Einlernvorgangs bewegen sich die
Torflügel immer mit reduzierter Geschwindigkeit.
Die beiden Öffnungs-/Schließzyklen müssen komplett abgelaufen
sein, damit der automatische Einlernvorgang erfolgreich ist. Wird
die Bewegung der Torflügel während des automatischen Einlern-
vorgangs unterbrochen, wird der Vorgang verschoben und bei der
nächsten kompletten Öffnung des Tors wieder aufgenommen.
DER ANTRIEB IST BETRIEBSBEREIT.
Standardmäßig arbeitet er im sequenziellen Modus.
9. BEDIENUNG
Der Antrieb kann im sequenziellen Modus oder im automatischen Schließ-
modus arbeiten.
•
Sequenzieller Modus
: Die aufeinanderfolgende Betätigung der
Taste am Funkhandsender führt zu folgenden Torbewegungen: Öff-
nen, Stopp, Schließen, Stopp, Öffnen ...
•
Automatischer Schließmodus
: Ein Druck auf die programmierte
Taste des Funkhandsenders öffnet das Tor komplett. Nach 30 Se-
kunden schließt sich das Tor wieder. Wenn eine Lichtschranke ins-
talliert ist, wird die automatische Schließung 5 Sekunden, nachdem
sie passiert wurde, ausgelöst.
Es ist möglich, das Tor offen zu halten, indem während der Verzögerungs-
zeit ein Stopp-Befehl gegeben wird. Zum Schließen des Tors muss die Tas-
te des Funkhandsenders erneut gedrückt werden.
Funkhandsender mit 3 Tasten - Verwendung der mittleren Taste
• Bei geschlossenem Tor löst ein Druck auf die mittlere Taste eine
Fußgängeröffnung des Tors aus (der Motor M1 öffnet den angetrie-
benen Flügel).
• Während sich das Tor bewegt, bringt ein Druck auf die mittlere Taste
das Tor zum Stillstand.
Weitere Informationen finden sich im Teil Bedienungsanleitung.
10. ERWEITERTE
EINSTELLUNGEN
10.1. Aktivieren des automatischen Zulaufs
Achtung
Der Antrieb arbeitet standardmäßig im sequenziellen Modus.
Für die Verwendung Ihres Tors im Automatikmodus schreibt die
Norm EN 12 453 die Installation einer Lichtschranke vor. Die
Umschaltung auf Automatikbetrieb ist unmöglich, wenn keine
Lichtschranke installiert ist. Somfy empfiehlt die Installation einer
gelben Signalleuchte und einer Somfy Umfeldbeleuchtung.
1
2
1
2
3
4
Erinnerung: Position Taste 1 und Taste 2
2 Tasten
4 Tasten
1)
Legen Sie einen gespeicherten Funkhandsender auf die Zielmarkie-
rung auf der Abdeckhaube.
2)
Drücken Sie auf Taste 1 des Funkhandsenders, bis die LED
blinkt.
RADIO
RESET
=
=
RADIO
RESET
=
=
3)
Drücken Sie auf Taste 2 des Funkhandsenders,
bis die LED
verlöscht und dann dauerha aufleuchtet.
Die LED
blinkt.
RADIO
RESET
=
=
RADIO
RESET
=
=
RADIO
RESET
=
=
RADIO
RESET
=
=
10
Copyright© 2017 SOMFY ACTIVITES SA. All rights reserved.
Axovia 220B RTS
DE