85
The remote control allows you to switch the stove on and off and change the power
level of the appliance (the stove cannot be in automatic mode). It may be necessary
to pair the remote control:
1- Press and hold the 2 buttons (combinations: 1-2, 1-3, 1-4, 2-3, 2-4, 3-4);
2- The led starts flashing quickly;
3- After 10s, the led remains on;
4- After the led is steady stop pressing the buttons in less than 5s;
5- If you do not stop pressing the buttons, the led turns off and the serial number is
not changed (protection against accidental pressing) and the control is no longer paired
with the stove.
List of serial numbers:
Button combinations
Frequency (bit)
1-2 (default)
00000100
1-3
00000101
1-4
00000110
2-3
00001001
2-4
00001010
3-4
00001100
Code List:
Button
Associated Code (bit)
Button 1 (ON)
Code: 11
Button 2 (+)
Code: 01
Button 3 (-)
Code: 00
Button 4 (OFF)
Code: 10
This remote control works with two CR2016 3V batteries, similar to the one in the
picture below.
Summary of Contents for Everest
