SOLZAIMA Everest, Instruction Manual

Page: 127 / 171

122
a)
b)
Figure 109 - a) Vacuum the interior; b) Clean using a brush
22.3.2.
Cleaning the deflecting plate
For this unit, you need to remove the ashes that are accumulated behind the deflecting
plate. To perform this operation, you need to remove the unit's insulation (vermiculite).
First, you must remove the supply channel on the side of the unit (Figure 110). To
remove this component, you must unscrew the securing nuts (use a M10 open-end
wrench). This operation is only performed in the Nevada pellet stove.
Figure 110 - Removing the supply channel
Next, remove the vermiculite parts, by detaching them from their support brackets
(Figure 111). To remove them, you must follow a sequence, first removing the rear
vermiculite (1) and only then the side parts (2).
a)
b)
Figure 111 - Removing vermiculite parts
1
2
2