SOLZAIMA Everest, Instruction Manual

Page: 58 / 171

53
IMPORTANT NOTICE: The cables must not be in contact or in close proximity
to very hot surfaces. Please keep them as far as possible (In the kit there are
two clamps to keep the cables away from the hot zones).
l) To complete the assembly, you must assemble the front grille by doing the reverse
procedure (12.2 a). Then carry out the procedure set out in point 11.3 and reattach
the covers.
VERY IMPORTANT: Before fitting the casings, you should check if the ductable
air damper is in operation.
Figure 82 – Check the registry lock
11.2.2.
Adjusting the ductable air intake
The user can adjust the size (reduce the size) of the part, if necessary, to do so he
must cut the part at the location marked.
a) Dismantle the upper covers on the pipe, carefully removing the pieces, as there is
thermal insulation inside and it can be damaged in case of misuse.
Figure 83 – Dismantling thermal insulation
Move the tab
from side to
side