SOLZAIMA Everest, Instruction Manual

Page: 29 / 171

24
9.6.
Installation with chimney
As shown in Figure 26, the installation of the pellet stove brings the exhaust pipe
directly to the chimney. If the chimney is too large is recommended to intubate the
smoke outlet with a minimum internal diameter of 80 mm.
To predict on the basis of the pipeline a "T" for the periodic inspections and annual
maintenance, as illustrated in the figure below.
Figure 26 - Side view of fireplace installation, with example of the inspection point
When the weather conditions are adverse to such an extent that cause strong
disruption on the flue draught stove (particularly winds too strong), it is advisable not
to use the stove.
In case of non-use of the equipment for an extended period, the user must ensure the
absence of any blockage in the tubes of the chimney before firing.
The chimney must be fitted with suitable meeting the anti-wind Hat local
regulations in force.
Is not allowed in the use of flexible hose in stainless steel or flat steel tube.
Do not place more than 3 bends in a flue.
Failure to comply with these requirements undermines the proper functioning of
the stove. Fully respect the indications of schemas.
Inspection